*note: this is the sample document for the related job only
*author: theprocedure@engineer.comPOWER SUPPLIES INTO THE PANEL MAYBE GREATER THAN 24VOLTS. CARE MUST BE TAKEN NOT TO TOUCH LIVE PARTS OR CAUSE A SHORT CIRCUIT WITHIN THE PANEL IF WORK IS CARRIED OUT WHILST THE PANEL IS "LIVE".
1. INSPECT EXTERNALLY AND INTERNALLY FOR
CORROSION AND DAMAGE.
2. ENSURE THE PANEL IS INTERNALLY CLEAN.
3. CHECK THAT ALL COMPONENTS ARE SECURE AND CARDS ARE SECURELY
CLIPPED IN PLACE.
4. VISUALLY CHECK CONDITION OF INDICATORS , CONTROLLERS
AND ANNUNCIATORS.
2. ENSURE THE PANEL IS INTERNALLY CLEAN.
3. CHECK THAT ALL COMPONENTS ARE SECURE AND CARDS ARE SECURELY
CLIPPED IN PLACE.
4. VISUALLY CHECK CONDITION OF INDICATORS , CONTROLLERS
AND ANNUNCIATORS.
5. IF "LAMP TEST" FACILITY IS PROVIDED
CHECK THAT LAMPS
ILLUMINATE CORRECTLY. REPLACE FAULTY LAMPS .
6. VISUALLY CHECK TERMINALS AND CONDITION OF INTERNAL WIRINGS.
7. CHECK CABLE GLANDS FOR TIGHTNESS.
8. IF VENTILLATION FANS ARE FITTED , CHECK THE FANS OPERATE
CORRECTLY ANY ASSOCIATED AIR FILTERS ARE CLEAN AND
NOT BLOCKED.
ILLUMINATE CORRECTLY. REPLACE FAULTY LAMPS .
6. VISUALLY CHECK TERMINALS AND CONDITION OF INTERNAL WIRINGS.
7. CHECK CABLE GLANDS FOR TIGHTNESS.
8. IF VENTILLATION FANS ARE FITTED , CHECK THE FANS OPERATE
CORRECTLY ANY ASSOCIATED AIR FILTERS ARE CLEAN AND
NOT BLOCKED.
9. CHECK THAT THE PANEL ROOF IS CLEAN AND CLEAR
OF
FOREIGN MATERIALS.
FOREIGN MATERIALS.
10. ENSURE THAT THE DOORS
CLOSE CORRECTLY AND LATCH.
11. IF INTERNAL LIGHT FITTINGS ARE PROVIDED CHECK THAT
THESE FITTINGS ARE "ON" WHEN THE DOORS ARE OPEN.
11. IF INTERNAL LIGHT FITTINGS ARE PROVIDED CHECK THAT
THESE FITTINGS ARE "ON" WHEN THE DOORS ARE OPEN.
Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts.
ReplyDeleteproperty management services in ma
Nice post. Thanks for sharing this blog. We also Manufacturers of control panel manufacturer Control Panel Manufacturer
ReplyDeleteYour post is really good. Useful content.
ReplyDeleteElectrical Control Panel Manufacturers
Electrical Testing and InspectionWe are leading electrical inspection and testing company for Fixed Wire Testing and Installation. We are located in Liverpool visit/call us at 07851 951 553
ReplyDeleteInteresting Content. Please do visit the link below.
ReplyDeleteFabrication Drawings preparation